Kichler 43686 User Manual download pdf

IMPORTANT SAFETY INSTRUCTIONS

LIGHTED BULB IS HOT!

WARNING: To reduce the risk of FIRE or INJURY TO PERSON:

• Turnoffandallowtocoolbeforereplacingbulb.

• BulbgetsHOTQUICKLY!Contactswitchonlywhenturningoff.

• DONOTremaininlightifskinfeelswarm.(Lightisintense,

 maycause“sunburn”)

• DONOTlookdirectlyatlightedbulb.

• Keepmaterialsawayfrombulbthatmayburn.

• UseONLYwithwattagespeciedorlower.

• DONOTtouchbulbatanytime,useasoftcloth.Oilfromskin

 maydamagebulb.

• DONOToperatexturewithmissingordamagedglass.

1) Passxturewirefromeachcouplingontopofxture 

 throughonestemforeachsideandscreweachsteminto

 eachcoupling.NOTE: Threadlockingcompoundmustbe

 appliedtoallstemthreadsasnotedwithsymbol(3)to 

 preventaccidentalrotationofxtureduringcleaning, 

 relamping,etc.

2) Passxturewirethroughremainingstemsandscrewstems

 together.

3) Threadonesmallthreadedpipeintoendofeachsmallloop.

4) Passxturewirethroughrstloop.Threadonerstloop

 ontoendofeachlaststem.

5) Passxturewirethroughsecondloopandthroughholein

 canopy.Passthreadedpipeatendofsecondloopthrough

 holeincanopy.

6) Passxturewirethroughholeinlockwasher.Thread 

 lockwasherontoendofthreadedpipeprotrudingfrom 

 insidecanopy.

7) Passxturewirethroughholeinhexnut.Threadhexnutonto

 endofthreadedpipe.

8) Repeatsteps5-7toattachlaststemtocanopy.

9) Attachchainlinktosmallloopatendofeachstemandto

 eachlooponcanopy.

10) TURN OFF POWER.

IMPORTANT:Beforeyoustart,NEVERattemptanywork

 withoutshuttingofftheelectricityuntiltheworkisdone.

 a) Gotothemainfuse,orcircuitbreaker,boxinyour 

  home.Placethemainpowerswitchinthe“OFF” 

  position.

 b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreaker

  switch(s),thatcontrolthepowertothextureorroom

  thatyouareworkingon.

 c) Placethewallswitchinthe“OFF”position.Ifthexture

  tobereplacedhasaswitchorpullchain,placethosein

  the“OFF”position.

11)Findtheappropriatethreadedholesonmountingstrap.

 Assemblemountingscrewsintothreadedholes.

12)Attachmountingstraptooutletbox.(Screwsnotprovided).

 Mountingstrapcanbeadjustedtosuitpositionofxture.

13)Groundinginstructions:(SeeIllus.AorB).

 A) Onxtureswheremountingstrapisprovidedwitha

  holeandtworaiseddimples.Wrapgroundwirefrom

  outletboxaroundgreengroundscrew,andthreadinto

  hole.

 B) Onxtureswhereacuppedwasherisprovided.Attach

  groundwirefromoutletboxundercuppedwasherand

  greengroundscrew,andthreadintomountingstrap.

 Ifxtureisprovidedwithgroundwire.Connectxture 

 groundwiretooutletboxgroundwirewithwireconnector

 (notprovided.)afterfollowingtheabovesteps.Never 

 connectgroundwiretoblackorwhitepowersupplywires.

MOUNTINGSTRAP

ABRAZADERADEMONTAJE

CANOPY

ESCUDETE

DateIssued:10/17/14 IS-43686-US

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

(NOT PROVIDED)

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

SEE OTHER SIDE FOR SPANISH TRANSLATIONS.

VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.

KNURLKNOB

PERILLAESTRADA

SMALLLOOP

ARGOLLA

PEQUEÑA

CHAINLINK

ESLABÓNDECADENA

STEM

VASTAGO

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

GLASS

VIDRIO

14) Makewireconnections(connectorsnotprovided).Reference

 chartbelowforcorrectconnectionsandwireaccordingly.

15) Pushxturetoceiling,carefullypassingmountingscrews

 throughholesincanopy.

16) Threadknurlknobsontomountingscrews.Tightenknurl

 knobstosecurexturetoceiling.

17) Raiseglassuptoxture.Passtopofglassthroughholein

 bottomofxturebody.Passholeinglassoversocket.

18) Slipspaceroversocket.

19) Attachsocketringtosocketringtool.

20) Raisesocketringtoolwithsocketringattacheduptoxture

 Passsocketringtoolwithsocketringattachedthroughholein

 glass.Threadsocketringontosocket.Tightensocketringto

 secureglassinplace.(DONOTovertighten.)

21) Insertrecommendedbulb.CAUTION: DONOTtouchbulb

  withbarehands.Ifthishappens,cleanbulbwithdenatured

  alcoholandalintfreecloth.

22) Slipglasssleeveoverbulb.Carefullythreadglasssleeve

  ontosocket.(DONOTovertighten.)

HEXNUT

TUERCA

HEXAGONAL

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

LOCKWASHER

ARANDELADE

SEGURIDAD

SOCKETRING

ANILLODELCASQUILLO

SPACER

ESPACIADOR

SOCKETRINGTOOL

HERRAMIENTADEL

ANILLODELCASQUILLO

FIXTUREBODY

CUERPODELARTEFACTO

BULB

BOMBILLA

GLASSSLEEVE

CAMISADEVIDRIO

1 2

866-558-5706 1

Summary of Contents

Page 1 - 866-558-5706

IMPORTANT SAFETY INSTRUCTIONSLIGHTED BULB IS HOT!WARNING: To reduce the risk of FIRE or INJURY TO PERSON:• Turnoffandallowtocoolbeforereplacin

Page 2

 Silalámparavieneconalambreatierra.Conecterel  alambreatierradelalámparaalalambreatierradelacaja tomacorrienteconuncon