Kichler 43278 User Manual

Browse online or download User Manual for Lighting Kichler 43278. Kichler 43278 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
MOUNTING STRAP
ABRAZADERA DE MONTAJE
CHAIN DROP INSTALLATION INSTRUCTIONS
1) Screw short threaded pipe into hole in top of fixture body.
2) Thread loop onto threaded pipe on top of fixture body.
3) Screw small threaded pipe into loop on other end of chain.
4) Pass threaded pipe on end of loop through hole in canopy.
5) From inside canopy, pass hole in flat washer over end of
threaded pipe.
6) Pass hole in lockwasher over end of threaded pipe protruding
from inside canopy. Thread hexnut onto end of threaded
pipe. Tighten hexnut to secure canopy to fixture.
7) TURN OFF POWER.
IMPORTANT: Before you start, NEVER attempt any work
without shutting off the electricity until the work is done.
a) Go to the main fuse, or circuit breaker, box in your
home. Place the main power switch in the “OFF” position.
b) Unscrew the fuse(s), or switch “OFF” the circuit breaker
switch(s), that control the power to the fixture or room
that you are working on.
c) Place the wall switch in the “OFF” position. If the fixture
to be replaced has a switch or pull chain, place those in
the “OFF” position.
8) Find the appropriate threaded holes on mounting strap.
Assemble mounting screws into threaded holes.
9) Attach mounting strap to outlet box. (Screws not provided)
Mounting strap can be adjusted to suit position of fixture.
10) Grounding instructions: (See Illus. A or B).
A) On fixtures where mounting strap is provided with a hole
and two raised dimples. Wrap ground wire from outlet
box around green ground screw, and thread into hole.
B) On fixtures where a cupped washer is provided. Attach
ground wire from outlet box under cupped washer and
green ground screw, and thread into mounting strap.
If fixture is provided with ground wire. Connect fixture ground
wire to outlet box ground wire with wire connector. (Not provided.)
After following the above steps. Never connect ground wire to
black or white power supply wires.
11) Make wire connections (connectors not provided.) Reference
chart below for correct connections and wire accordingly.
12) Push fixture to ceiling, carefully passing mounting screws
through holes in canopy.
13) Thread knurl knobs onto mounting screws. Tighten knurl
knobs to secure fixture to ceiling.
14) Screw finial onto threaded pipe on bottom of fixture body.
(DO NOT over tighten.)
SEMI FLUSH INSTALLATION INSTRUCTIONS
1) Screw short threaded pipe into hole in top of fixture body.
2) Pass hole in canopy down over end of threaded pipe. Set
canopy on top of fixture body.
3) From inside canopy, pass hole in flat washer over end of
threaded pipe.
4) Pass hole in lockwasher over end of threaded pipe protruding
from inside canopy. Thread hexnut onto end of threaded
pipe. Tighten hexnut to secure canopy to fixture.
5) Follow step #7-14 in Chain Drop Installation Instructions.
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Date Issued: 1/04/13
IS-43278-US
CANOPY
ESCUDETE
KNURL KNOB
PERILLA ESTRADA
THREADED PIPE
TUBO ROSCADO
FLAT WASHER
ARANDELA PLANA
HEXNUT
TUERCA HEXAGONAL
LOOP
LAZO
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
LOCKWASHER
ARANDELA DE SEGURIDAD
LOOP
LAZO
THREADED PIPE
TUBO ROSCADO
CANOPY
ESCUDETE
KNURL KNOB
PERILLA ESTRADA
FLAT WASHER
ARANDELA PLANA
HEXNUT
TUERCA HEXAGONAL
LOCKWASHER
ARANDELA DE SEGURIDAD
THREADED PIPE
TUBO ROSCADO
FINIAL
CAPUCHÓN
FINIAL
CAPUCHÓN
MOUNTING STRAP
ABRAZADERA DE MONTAJE
Page view 0
1 2

Summary of Contents

Page 1

MOUNTING STRAPABRAZADERA DE MONTAJECHAIN DROP INSTALLATION INSTRUCTIONS1) Screw short threaded pipe into hole in top of fixture body.2) Thread loop o

Page 2

INSTRUCCIONES PARA LA INSTALACIÓN DE ADORNO COLGANTE DE CADENA1) Atornillar el tubo roscado corto en el orificio de la parte superior del cuerpo de

Comments to this Manuals

No comments