Kichler 10198 User Manual download pdf

INSTALLATION INSTRUCTIONS

10198BK/WH

NOTE: This dimmer cannot be used with 10192BK60 or BK96 power supplies.

NOTE: The load on the dimmer cannot exceed 48W. Exceeding 48W may result in damage to the dimmer and tape system.

WARNING:

 •Thedimmershouldalwaysbeinstalledonthe24V,lowoutputsideofthepowersupply.

 • Donotconnectto120V,ordamagetothedimmerandtapesystemmayoccur.

 • Foruseindrylocationsonly.

CONNECTING:

1) The10198in-linedimmermustbeconnecteddirectlytothe24VoutputDC2.1jackfromthepowersupply.Connectthemale 

  DC2.1jackfrompowersupplytothefemaleconnectoronthedimmer.

2) ConnectthemaleDC2.1jackofdimmertothefemaleDC2.1jackonthetapelightpowersupplylead.

OPERATING:

1) Toturnlightson,twistthedialonthedimmerclockwiseuntilthelightreachesthedesiredlightlevel.

2) Toturnlightsoffordimdown,turnthedialonthedimmercounterclockwiseuntilthelightreachesthedesiredlightlevelor 

  youreachthefulloffpositionwhichisindicatedbya“click”.

OFF

POWER

SUPPLY

DC 24V

DateIssued:12/7/12 IS-10198-CB

www.kichler.com

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

INSTRUCTIONS D’INSTALLATION

10198BK/WH

REMARQUE :Cegradateurnepeutpasêtreutiliséavecdesalimentations10192BK60ouBK96.

REMARQUE :Lachargedugradateurnepeutpasdépasserles48W.Toutevaleursupérieureà48Wpeutentraînerdesdom-

mages au système gradateur et guirlande.

AVERTISSEMENT :

• Legradateurdoittoujoursêtreinstallésurlecôtédesortiebasse,24Vdel’alimentation.

• Nepasconnecterà120Vsousrisqued’endommagerlesystèmegradateuretguirlande.

• Àutiliseruniquementdansdesendroitssecs.

CONNEXION :

1) Legradateurenligne10198doitêtreconnectédirectementàlapriseDC2.1desortie24Vdel’alimentation.Connecterla 

  cheDC2.1mâledel’alimentationàlaprisefemellesurlegradateur.

2) ConnecterlacheDC2.1mâledugradateuràlapriseDC2.1femellesurleconducteurd’alimentationdelaguirlande.

FONCTIONNEMENT :

1) Pourallumer,tournerlecadransurlegradateurdanslesenshorairejusqu’àcequel’éclairageatteigneleniveaudeluminosité 

  souhaité.

2) Pouréteindreouassombrir,tournerlecadrandanslesensanti-horairejusqu’àcequel’éclairageatteignedeniveausouhaité

  ouquel’onentendeun«clique»signalantlapositionmaximum.

ALLUMÉ

ÉTEINT

ALIMENTATION

DC 24V

Summary of Contents

Page 1 - INSTRUCTIONS D’INSTALLATION

INSTALLATION INSTRUCTIONS10198BK/WHNOTE: This dimmer cannot be used with 10192BK60 or BK96 power supplies.NOTE: The load on the dimmer cannot exceed 4

Kichler 10198 User Manual

Browse online or download User Manual for Hardware Kichler 10198. Kichler 10198 Manuel d'utilisation

Summary of Contents

More documents for Hardware Kichler 10198

Comments to this Manuals

Kichler 10198 User Manual

Browse online or download User Manual for Hardware Kichler 10198. Kichler 10198 Manuel d'utilisation

Summary of Contents

More documents for Hardware Kichler 10198

Comments to this Manuals

Related products and manuals for Hardware Kichler 10198