Kichler 339022 User Manual download pdf (Page 8)

7

Fig. 9

9. ATTACHING THE FAN BLADES

Fig. 10

Step 1. Place a blade on a blade bracket

aliening the mounting holes on each. Start

each set of mounting screws, washers and

fiber pads into each hole.

Make sure the blade is straight on the blade

bracket and tighten each mounting screw until

the fiber pad is slightly compressed.

Step 2. Attach each blade assembly to the

motor using the "Pre-installed" mounting

screws in the blade bracket. (Fig 9)

Repeat the above process for each blade

assembly.

Set of blade brackets

Blades

Fiber washers

Washers

Screws

Screws

Screws

Mounting plate

Mounting ring

10. INSTALLING THE SWITCH HOUSING

PLATE

1. Loosen two screws on the mounting ring

attached to the motor shaft and "remove" and

save the third screw. (Fig. 10)

2. Place the key holes on the mounting plate

over the 2 screws previously loosened from

the mounting ring, turn mounting plate until it

locks in place at the narrow section of the key

holes. Secure by tightening the 2 screws

previously loosened and the one previously

removed. (Fig. 10)

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments