Kichler 339022 User Manual download pdf (Page 7)

6

Fig. 7

Fig. 8

8. INSTALLING THE MOTOR HOUSING

Remove the four sets of nuts and washers

located on the mounting plate threaded studs.

Hang the motor assembly from the hook on

the ceiling mounting plate by placing the hook

into a hole on the mounting plate.

Place the wires and connections inside the

mounting plate and the ceiling mounting plate.

Swing the motor assembly up into position

under the ceiling mounting plate, align the

holes on the mounting plate with the four studs

on the ceiling mounting plate and push the

motor assembly onto the studs. Secure with

the four nuts and washers you removed

earlier. (Fig. 7)

Ceiling

mounting

bracket

Motor

Motor

housing

Ceiling mounting

plate

Screws

Motor assembly

Washer

Washers

Nut

Nut

Mounting plate

Remove the four screws located on the

outside edge of the ceiling mounting plate.

Lift the Motor Housing up and align the

mounting holes in the housing to the mounting

holes on the ceiling mounting plate.

Insert each mounting screw rotating first one

side to the other and then tighten each screw

after all four have been started. (Fig. 8)

7. FINISHING THE INSTALLATION

52" Stratmoor

TM

Mounting plate

threaded studs

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments