RIGID STEM MOUNT INSTALLATION
1) Align holes in plate on bottom of arm with holes on inside of ring.
2) Thread screws into holes in plate and into ring. Tighten screws to
secure arm to ring. Repeat for remaining arms.
3) Passwirethroughstemandscrewstemintocouplingontopofxture
body. NOTE: Thread locking compound must be applied to all stem
threads as noted with symbol (3) to prevent accidental rotation of
xtureduringcleaning,relamping,etc.
4) Passxturewirethroughremainingstemsandscrewstemstogether.
5) Screw short threaded pipe into top of stem.
6) OPTIONAL STEP: Pass decorative cap over end of threaded pipe.
7) Pass hole in canopy over end of threaded pipe on top of stem.
8) Sliplockwasheroverendofthreadedpipeandscrewhexnutontoend
ofthreadedpipe.Tightenhexnuttosecurecanopytoxture.
9) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanyworkwithout
shutting off the electricity until the work is done.
a) Gotothemainfuse,orcircuitbreaker,boxinyourhome.Place
the main power switch in the “OFF” position.
b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreakerswitch(s),
thatcontrolthepowertothextureorroomthatyouareworkingon.
c) Placethewallswitchinthe“OFF”position.Ifthexturetobe
replacedhasaswitchorpullchain,placethoseinthe“OFF”
position.
10) Find the appropriate threaded holes on mounting strap. Assemble
mounting screws into threaded holes.
11)Attachmountingstraptooutletbox.(Screwsnotprovided).Mounting
strapcanbeadjustedtosuitpositionofxture.
12)Makewireconnections(connectorsnotprovided).Referencechart
below for correct connections and wire accordingly.
14)Pushxturetoceiling,carefullypassingmountingscrewsthroughholes
in canopy.
15)Securexturetoceilingwiththreadedballs.
16) Set glass down over sockets.
17) Attach socket ring to socket ring tool.
18) Lower socket ring tool with socket ring attached down through glass.
Thread socket ring onto socket. Tighten socket ring to secure glass in
place. (DO NOT over tighten.)
INSTALLATION MONTAGE TIGE RIGIDE
1) Aligner les trous dans la plaque sur la partie inférieure du bras avec
ceuxsituésàl’intérieurdel’anneau.
2) Serrerlesvisdanslestrousdelaplaqueetdansl’anneau.Serrerles
vispourxerlebrasàl’anneau.Répéterl’opérationpourlesautres
bras.
3) Acheminerlelduluminaireparlatigeetvisserlatigeenhautduluminaire.
REMARQUE : appliquerlefreinletsurtouslesletsdelatige
indiqués par le symbole (3) pour empêcher la rotation accidentelle
duluminairependantlenettoyage,remplacementdelampe,etc.
4) Acheminerlelduluminaireparlestigesrestantesetvisserlestiges
ensemble.
4) Visserletubeletédanslesextrémitésdesboucles.
6) ÉTAPE OPTIONNELLE : Placer un bouchon décoratif sur chaque tige.
5) Attachezlapetiteboucheàl’extrémitédelatigesupérieure
7) Passerletroudanslecachesurl’extrémitésdutubeleté.
8) Passerlarondelledeblocagesurletubeletésortantdel’intérieurdu
cache.Visserl’écrouhexagonalsurletubeleté.
9) COUPER LE COURANT.
IMPORTANT:TOUJOURScouperl’électricitéavantdecommencerle
travail.
a) Localiserlecoffretàfusiblesouledisjoncteurdudomicile.Mettre
l’interrupteurprincipalenpositiond’Arrêt.
b) Dévisser le ou les fusibles (ou mettre le disjoncteur sur Arrêt) qui
contrôlentl’alimentationversleluminaireoulapiècedans
laquelle le travail est effectué.
c) Mettrel’interrupteurmuralenpositiond’Arrêt.Sileluminaireà
remplacerestdotéd’uninterrupteuroud’unechaîneconnectéeà
l‘interrupteur,placercesélémentsenpositiond’Arrêt.
10)Trouverlestrousletésappropriéssurlabarrettedemontage.Vissez
lesvisdemontagedanslestrousletés.
11)Visserlabarrettedemontageàlaboitedejonction.(Visnonfournies).
Labarrettedemontagepeutetreajustéepourconveniràlapositionde
l’applique.
12)Connecterlesls(connecteursnonfournis).Sereporterautableau
ci-dessouspourfairelesconnexions.
13)Appliquerl’armatured’éclairageauplafondenintroduisantprudemment
lesvisdexationdanslestrous.
14)Visserlelustreauplafondál’aidedesrondelles-freinetdesboulesletées.
15) Placer le verre sur la douille.
16)Fixerl’anneaudeprisesurl’outilpourl’anneaudeladouille.
17)Abaisserl’outildel’anneaudeladouilleavecl’anneaudeladouilleattaché
enbasduverre.Resserrerl’anneaudeladouillepourbienxerleverre.
(NEPASserreravecexcès).
LOOP/CHAIN LINK MOUNT INSTALLATION
1-4)Followsteps#1-4inRIGIDStemMountInstallationinsructions.
5) Thread small threaded pipe into end of each small loop.
6) Attach small loop to end of last stem.
7) Pass threaded pipe at end of second small loop through hole in canopy.
8) Slip lockwasher over threaded pipe protruding from inside of canopy
andscrewhexnutontothreadedpipe.
9) Attach chain link to small loop at end of stem and to loop on canopy.
10-19)Followsteps#9-18inRIGIDStemMountInstallationinsructions.
INTALLATION DES LIENS EN BOUCLE/MAILLON
1-4)Suivezlesétapes#1-4danslesinstructionsd’installationmontagetige
rigide.
5) Visserunpetittubeletédansl’extrémitédechaqueboucle.
6) Attachezlapetiteboucheàl’extrémitédelatigesupérieure
7) Passerletubeletéàl’extrémitédeladeuxièmepetiteboucleparle
trou situé dans le cache..
8) Passerlarondelledeblocagesurletubeletésortantdel’intérieurdu
cache.Visserl’écrouhexagonalsurletubeleté.
9) Attacherlemaillondelachaîneàlapetitebouclesituéeàl’extrémitéde
latigeainsiqu’àlabouclesituéesurl’abat-jour.
10-19)Suivezlesétapes#9-18danslesinstructionsd’installationmontage
tige rigide
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Date Issued: 7/15/11 IS-42944-CB
4
SEE OTHER SIDE FOR SEMI FLUSH INSTALLATION.
VOIR LE VERSO POUR LES INSTRUCTIONS
D’INSTALLATION SEMI-ENCASTRÉE
THREADED BALL
BOULE FILETÉ
GLASS
VERRE
RING
ANNEAU
SCREW
VIS
LOOP
ANNEAU
RIGID STEM MOUNT
MONTAGE TIGE RIGIDE
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
MOUNTINGSTRAP
PATTE DE FIXATION
CANOPY
CACHE
THREADED BALL
BOULE FILETÉ
STEM
TIGE
Connecter le fil noir ou
rouge de la boite
Connecter le fil blanc de la boîte
A Noir A Blanc
*Au cordon parallèle (rond et lisse)
*Au cordon parallele (à angles droits el strié)
Au bransparent, doré, marron, ou
noir sans fil distinctif
Au transparent, doré, marron, ou
noir avec un til distinctif
Fil isolé (sauf fil vert) avec
conducteur en cuivre
Fil isolé (sauf fil vert) avec
conducteur en argent
*Remarque: Avec emploi d’un fil paralléle
(SPT I et SPT II). Le fil neutre est á angles
droits ou strié et l’autre fil doit étre rond ou
lisse (Voir le schéma).
Fil Neutre
DECORATIVECAP
BOUCHON DÉCORATIF
SOCKET RING
BAGUE DE LA
DOUILLE
SOCKET RING TOOL
OUTILDEL’ANNEAU
DE LA DOUILLE
PLATE
PLAQUE
ARM/RINGDETAIL
DÉTAIL DU BRAS/
ANNEAU
Comments to this Manuals