Kichler 42114 User Manual

Browse online or download User Manual for Lighting Kichler 42114. Kichler 42114 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
MOUNTING STRAP
ABRAZADERA DE
MONTAJE
CHAIN DROP INSTALLATION
1) Pass fixture wire from top of fixture body through hole in top
trim. Lower top trim down over fixture body. Pass hole in top
trim over end of threaded pipe on top of fixture body. Set
top trim on top of fixture body.
2) Pass fixture wire through hole in bottom of loop. Screw loop
onto threaded in center of top trim.
3) TURN OFF POWER.
IMPORTANT: Before you start, NEVER attempt any work
without shutting off the electricity until the work is done.
a) Go to the main fuse, or circuit breaker, box in your
home. Place the main power switch in the “OFF” position.
b) Unscrew the fuse(s), or switch “OFF” the circuit breaker
switch(s), that control the power to the fixture or room that
you are working on.
c) Place the wall switch in the “OFF” position. If the fixture
to be replaced has a switch or pull chain, place those in
the “OFF” position.
4) Find the appropriate threaded holes on mounting strap.
Assemble mounting screws into threaded holes.
5) Attach mounting strap to outlet box. (Screws not provided).
Mounting strap can be adjusted to suit position of fixture.
6) Grounding instructions: (See Illus. A or B).
A) On fixtures where mounting strap is provided with a
hole and two raised dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Attach
ground wire from outlet box under cupped washer and
green ground screw, and thread into mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector.
(Not provided.) After following the above steps. Never connect
ground wire to black or white power supply wires.
7) Make wire connections (connectors not provided.) Reference
chart below for correct connections and wire accordingly.
8) Push fixture to ceiling, carefully passing mounting screws
through holes in canopy.
9) Thread knurl knobs onto mounting screws. Tighten knurl
knobs to secure fixture to ceiling.
10) Screw finial onto threaded pipe on bottom of fixture.
11) Place bobeches over candle covers.
12) Attach bead strands to scrolls at top of fixture and arms.
13) Attach crystals to bottom of arms.
SEMI FLUSH INSTALLATION
1) Remove small loop from canopy by unscrewing hexnut and
lockwasher on threaded pipe inside canopy.
2) Pass fixture wire through hole in canopy. Set canopy down
on top of fixture body passing hole in canopy over end of
threaded pipe.
3) Pass fixture wire through hole in lockwasher. Thread lockwasher
onto threaded pipe protruding from inside canopy.
4) Pass fixture wire through hole in hexnut and thread hexnut
onto end of threaded pipe.
5) Follow steps 3-13 in Chain Drop Installation Instructions.
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Date Issued: 7/9/10
IS-42114-US
CANOPY
ESCUDETE
KNURL KNOB
PERILLA ESTRADA
SMALL LOOP
PEQUEÑO LAZO
TOP TRIM
GUARNICIÓN SUPERIOR
MOUNTING STRAP
ABRAZADERA DE MONTAJE
CANOPY
ESCUDETE
KNURL KNOB
PERILLA ESTRADA
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
SEMI FLUSH INSTALLATION
INSTRUCCIONES DE SEMIRRÁS Y EN LA PARED
CHAIN DROP INSTALLATION
LA INSTALACIÓN DEL CADENA DE SUSPENSION
Were here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
LOOP
LAZO
THREADED PIPE
TUBO ROSCADO
BOBECHE
TAZONE-
ARANDELA
BEAD STRAND
HILO PERLADO
CRYSTAL
CRISTALE
FINIAL
CAPUCHÓN
Page view 0
1 2

Summary of Contents

Page 1 - 866-558-5706

MOUNTING STRAPABRAZADERA DE MONTAJECHAIN DROP INSTALLATION1) Pass fixture wire from top of fixture body through hole in top trim. Lower top trim dow

Page 2

LA INSTALACIÓN DEL CADENA DE SUSPENSION1) Pase el alambre del artefacto a través del agujero en el guarnición superior. Baje el guarnición superi

Comments to this Manuals

No comments