SLOPE CEILING ADAPTER READ AND SAVE THESE INSTRUCTIONS337005U.S. Patent Pending
ADCFBEGA. Mounting plate... (1 PCs.)B. Hanger bracket (located inside canopy)... (1 PCs.)C. Hanger bal
2SLOPE CEILING ADAPTER Fig. 1Fig. 2Fig. 4Fig. 3Ceiling joistCeiling joistANGLED CEILINGMAXIMUM 60° ANGLEMOUNTING OPTIONSMake sure the outlet box you&a
Fig. 5A. INSTALLING THE MOUNTING PLATE TO A OUTLET BOX (MOUNTED DIRECTLY TO A CEILING JOIST)1. Remove two knock-outs from the outlet box to expose the
4SLOPE CEILING ADAPTER Fig. 8Fig. 9Fig. 10INSTALLING THE HANGING BRACKET TO MOUNTING PLATE ASSEMBLY1. Remove the canopy cover from the canopy by turni
Fig. 11Fig. 124. Loosen the two set screws in the motor coupling until the inside channel is clear of the screws. Remove the Safety Pin and Locking C
Fig. 13NOTE: The Hanger Ball can be installed in ONLY one direction. The "cutout" should be toward the "Lower" end of the ceilin
Fig. 16Fig. 15FINISHING THE INSTALLATION1. Now, rotate the "entire fan andslope adaptor assembly" (left or right) by rotating the hanger br
Comments to this Manuals