Kichler 300427 User Manual download pdf (Page 11)

10

Fig. 20

Fig. 21

Fig. 22

14. OPERATING INSTRUCTIONS

Remove the battery compartment cover on the

back of the CoolTouch™ Transmitter and

insert both batteries provided. Make sure the +

sign is facing up.

Take care during this procedure NOT TO

move the frequency dip switches inside this

compartment. The settings MUST remain the

same as the settings on the receiver for proper

communication with the control system.

It's a good idea to remove these batteries if

your fan is not used for extend periods of time,

(months).

13. INSTALLING THE BATTERIES

Leeds

TM

Slide switch

Restore power to ceiling fan and test for

proper operation.

A. , , and buttons:

These three buttons are used to set the

fan speed as follows:

= High speed

= Medium speed

= Low speed

B. button:

This button turns the fan off.

C. The " " button: turns the light fixture On

or Off. Press and release once for either

On or Off.

DO NOT substitute Incandescent Lamps for

Fluorescent Lamps. You will damage your fan.

This control is designed for use with

"Fluorescent Lamps". It is NOT designed to

control dimming of the light fixture.

This control system is NOT designed to

"Reverse" the rotation of the blades. To set

the fan blades in reverse, the reverse slide

switch is located on the top of the Motor

Housing. See Fig. 22

1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments