Kichler 300011 User Manual download pdf (Page 13)

Olympia

Fig. 25

Fig. 26

15. INSTALLING THE COOLTOUCH

CONTROL SYSTEM WALL PLATE

To install the CoolTouch

control system wall

plate, you can select the following locations to

fulfill your wall plate installation:

1. Using the existing wall outlet box:

Step 1. Remove the existing wall plate and the

old switch from the wall outlet box. Wire nut

the BLACK leads (hot) together and push back

inside the outlet box. (Fig. 25)

Step 2. Install the CoolTouch

wall plate to the

existing wall outlet box with 2 screws provided.

(Fig. 26)

2. Install on flat wall:

Place the CoolTouch

wall plate on a flat wall

using the wall anchors and 2 wood screws

provided.

16. IINSTALLING THE TRANSMITTER

1. To place the transmitter in the wall plate, put

the bottom end in first and then press the top

into the wall plate. The transmitter is now held

in the wall plate and will function from here.

(Fig. 27)

2. To remove the transmitter from the wall

plate, push the release button and the

transmitter will fall into your hand.

Screws

Wall plate

Switch

Outlet box

CoolTouch

wall plate

Outlet box

Release

button

Fig. 27

1 2 ... 8 9 10 11 12 13 14

No comments

Kichler 300011 User Manual Page 13